Do I use shock or algaecide first?

Do I use shock or algaecide first?

While shocking and adding algaecide is effective in getting rid of algae, it should not be done together. This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.

How long after putting algaecide in my pool can I shock it?

It is best to wait 30 minutes after adding it to your pool. We recommend waiting at least 15 minutes to swim after adding algaecide to your swimming pool. Most algaecides are perfectly safe to swim with. It is not recommended to swim with flocculent in your pool as it will reduce its effectiveness.

How long does it take for algaecide to dissipate?

The algaecide will slowly fade due to chlorine, so you can shock the pool with higher chlorine levels to speed up the process. Don't worry: even if you do not do this, the algaecide will disappear in about a week, or two at the most.

Should I brush my pool after adding algaecide?

After the chlorine level has come down below 5 ppm, add an algaecide and brush the pool again. When it all settles, vacuum the pool (to waste, if possible). Test and re-balance the pool water after it clears.

Why is my pool still green after shock and algaecide?

Algae will remain in your pool after shock if you've had insufficient chlorine and an overabundance of metal elements in the pool water. Therefore, to start the cleaning process. Remove all the debris from the pool with a leaf net and then let the smaller dirt fragments settle.

What happens if you put too much algaecide in your pool?

The presence of too much algaecide can lead to a foamy pool water. ... Air pockets within the filter system can cause bubbles on the pool surface as well. The bubbles and foam resulting from too much algaecide will be much smaller in size.

What do you do if you put too much algaecide in your pool?

0:503:13TOO MUCH ALGAECIDE & WHAT TO DO - YouTubeYouTube

Does Shocking a pool make it clear?

Adding a recommended dose of shock to your pool can clear it right up. Poor circulation or filtration can contribute to cloudy water. Make sure your pump and filter are working properly.

How long after shocking pool can I add algaecide?

• In fact, algaecides usually require a shock treatment before application anyway. In this manner, how soon after shocking pool can you add algaecide? Algaecide should be added after every shock treatment. What happens if you put too much shock in your pool?

How long after shock can I add clarifier?

• How long aftershock can I add a clarifier? You should wait at least 20 mins after putting shock in the pool and then add the clarifier. If you don’t wait, the chemicals won’t have time to balance themselves in the pool. Why is my pool still green after shock and algaecide?

How long does it take to get algae out of pool?

• If the algae hasn’t cleared up after 24-48 hours, clean and brush the pool and add another shock treatment. When the chlorine has completely finished working, the algae in the pool will turn a white/gray color and will either settle to the bottom of the pool or be suspended in the water.

When to add shock enhancer to pool water?

• Follow the directions on the shock enhancer container for the proper amount to add. Pour the shock into the pool in the late afternoon or evening, and run the circulating pump all night. Monitor the chlorine level, and when it falls below 5 ppm, add an algaecide to prevent further algae growth.