How is DCP measured?
Índice
- How is DCP measured?
- What is a DCP device?
- What does a DCP test show?
- How much does a DCP weigh?
- Why DCP test is done?
- Why do we do DCP test?
- How to calculate the cost of a DCP?
- How to calculate the DCP of a cone?
- How is the penetration depth of a DCP measured?
- How to calculate DCP for a master file?
How is DCP measured?
3:5410:59Operation of the Dynamic Cone Penetrometer - YouTubeYouTubeInício do clipe sugeridoFinal do clipe sugeridoYour test results with one hand placed on the top handle use the other hand to seat the cone tip byMoreYour test results with one hand placed on the top handle use the other hand to seat the cone tip by lifting and dropping the sliding hammer from a partial height.
What is a DCP device?
The Dynamic Cone Penetrometer (DCP) is used to determine underlying soil strength by measuring the penetration of the device into the soil after each hammer blow.
What does a DCP test show?
Dynamic Cone Penetration (DCP) testing is used to measure the strength of in-situ soil and the thickness and location of subsurface soil layers. ... It is similar to CPT (cone penetration testing) in that a metal cone is advanced into the ground to continuously characterize soil behavior.
How much does a DCP weigh?
Dynamic Cone Penetrometers (DCP) provides quick field determinations of in-place soil shear strengths at depths up to 6ft (1.8m), with optional extensions....
| Length | SF-20, Drive Rod: 30in (762mm) SF-10, Drive Rod: 37.75in (958.9mm) |
|---|---|
| Estimated Shipping Weight | SF-20: 53.0lb (24.04kg) SF-10: 50.0lb (22.68kg) |
Why DCP test is done?
DCP testing is used to determine the strength of the subsurface and design load of the soil. The engineers perform the testing in-situ to give an estimation of the load bearing capacity which a soil can withstand, by measuring the extent of penetration into the ground of a calibrated tip or cone.
Why do we do DCP test?
Dynamic Cone Penetration (DCP) testing is used to measure in-situ soil's strength and the thickness and location of subsurface soil layers. It is similar to CPT in that a metal cone is advanced into the ground to characterize soil behavior continuously.
How to calculate the cost of a DCP?
- Here you can precisely calculate the cost of your DCP. Be sure to enter the values for resolution, frame rate, audio etc. exactly as your master file render is, not as they might be when converted to a DCP. For example, if your master file is 16:9 aspect ratio but will end up Flat (1:1.85) in the DCP, enter 16:9 in the calculator.
How to calculate the DCP of a cone?
- This process is repeated until when the cone does not reach the required depth. Calculation of this test relies on correlations based on blow counts. CBR = 292/DPI 1.12 Now the penetration curve is made by placing DCP penetration (in mm) in Y-axis and no. of blows in X-axis.
How is the penetration depth of a DCP measured?
- The DCP was originally designed in South Africa by Kleyn (1975) and was originally intended to be used for pavement applications as an indicator test. The test is done by driving a cone into the ground by means of an 8 kg standard mass falling through a constant distance of 575mm. The penetration depth is recorded after every 5 blows.
How to calculate DCP for a master file?
- For example, if your master file is 16:9 aspect ratio but will end up Flat (1:1.85) in the DCP, enter 16:9 in the calculator. Note that certain other factors can affect pricing (subtitles, specific distributor requirements etc.) Contact SV2 DCP for a detailed quote. Pricing does not include cost of shipping.
