adplus-dvertising

How do I clean the dust out of my PS3 slim?

Índice

How do I clean the dust out of my PS3 slim?

How do I clean the dust out of my PS3 slim?

8:0815:28Proper cleaning and maintenance of your #PS3 Slim - YouTubeYouTubeInício do clipe sugeridoFinal do clipe sugeridoSo what you do is you take an air compressor or canned air and blow through the vents on this side.MoreSo what you do is you take an air compressor or canned air and blow through the vents on this side. You'll see that dust start coming out on the top.

How do I take my PS3 apart to clean it?

1:5512:46HOW TO: TAKE APART/CLEAN DIRTY PS3! - YouTubeYouTubeInício do clipe sugeridoFinal do clipe sugeridoScrewdriver. This is where your hard drive is and basically what I'm gonna use is a regular-sizedMoreScrewdriver. This is where your hard drive is and basically what I'm gonna use is a regular-sized screwdriver. Just go right inside here pop. This cover right off and see.

What screwdriver Do you need to open a PS3 Slim?

Compare with similar items
This item T10 Security Torx Tamper Proof Screwdriver with hole PS3 Fat Playstation Console Tool XBOX 360 YLODAntrader Perforated Manual T10 3mm Torx Tamper Proof Security Screwdriver
Sold By3RedLightFixAntrader Direct

How do you open a PS3 slim case?

Turn the PS3 over and lay it on its backside. Carefully peel the warranty sticker up off the lower case to reveal a hidden screw cover. To avoid activating the VOID that may come up, heat the sticker carefully to remove and replace it cleanly.

How do I open the fat on my PS3?

2:1716:21How To Disassemble the Fat Ps3 - YouTubeYouTube

How do you remove a Torx screw without a torx screwdriver?

Use a small flat head screwdriver. If you don't have a Torx screwdriver, you can attempt to unscrew the screw with a flat head screwdriver. Simply insert the flat head screwdriver into two opposite edges of the Torx screw head. Then, turn counterclockwise slowly to remove.

What is the blue screw on the bottom of my PS3?

The larger red rectangle is the blue screw securing the 120GB hard drive. As with the older units, Sony made this user replaceable so you are able to upgrade your hard drive without voiding the warranty.

How do I fix the fat button on my PS3?

3:245:00Sony PlayStation 3 Fat: Fix for unresponsive buttons - YouTubeYouTube

How do you take the cover off a PlayStation 3?

Lift the top cover from its rear edge and rotate it toward the front of the PS3. Remove the top cover. There is a plastic hook located in a hole on the top back right hand side corner. Carefully push the plastic hook a bit front the rear of the machine with a spudger to release the rear right of the casing.

What can I use instead of a Torx screwdriver?

Originally Answered: What can you use instead of a Torx screwdriver? Sometimes an allen key will work, or even a flat blade screwdriver if it will jam between opposite points in the recess. Either way, be ready to replace the screw and/or the tool used because of damage. Your best bet is just to get a Torx key.

How can I Clean my PS3 from standby?

  • If you have the original version of the PS3 you need to turn your PS3 from standby to off by flipping the switch on the back of the system. Hold down the eject button and then flip the switch back on. If you have the PS3 Slim you need to unplug the power cable from the system. Hold down the eject button and then plug the cable back in.

What can I use to Clean my PS3 controller?

  • Clean your controllers with a disinfectant wipe and toothpick. Use a toothpick to carefully dig out the gunk that is stuck in the seams between your buttons. Flip the controller over and use the toothpick to clean the seams where the plastic case is glued together.

Is there a way to repair a PS3 Slim?

  • To repair your PlayStation 3 Slim, use our service manual. It's here! We got our dirty hands on a PS3 Slim a full day before it was set to arrive in the mail! The box, just like the unit, is, well, slimmer. Did you know you can post your own teardown on iFixit?

How to unplug power cable on PS3 Slim?

  • Hold down the eject button and then flip the switch back on. If you have the PS3 Slim you need to unplug the power cable from the system. Hold down the eject button and then plug the cable back in.

Postagens relacionadas: