How do I access my D Link managed switch?

How do I access my D Link managed switch?

Type IP address 10.90. 90.90 in the WEB Browser of PC, you will then be asked to enter ID and Password so that you can log into the Switch device. The default ID is “admin”. The default Password is “admin”.

How do I connect a Dlink switch?

Plug an Ethernet cable into an Ethernet network port on each of the PCs or other network devices that you wish to connect to your network. Plug the other ends of the cables into free Ethernet ports on the front of the switch. The number of available ports on the switch is dependent on switch model.

What is D Link Smart switch?

Gigabit Smart Switches with Fibre Uplinks are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. ... The DGS-1210 Series switches can also detect the length of connected cables to automatically reduce power usage on shorter cable connections.

What is D Link Gigabit switch?

The D-Link DGS-1005A Switch provides you with 5 high speed Gigabit ports to instantly expand your network. ... This switch can be used to instantly add 5 wired Gigabit connections to your network. The built-in Cable Diagnostics function will notify users of any cable errors.

How do I find the IP address of my D-Link switch?

Type the switch's IP address into the address bar of your browser. Log into the switch (the default password is admin). Click OK. The network switch's default IP address is 10.90.

How do I connect to a managed switch?

Create the VLANs.

1. Log in to the management page of the switch.
2. Go to Routing - VLAN - VLAN Static Routing Wizard.
3. Enter the VLAN ID, the IP Address and the Network Mask for the VLAN. ...
4. Select the ports to add to the VLAN. ...
5. Click Apply. ...
6. When prompted with the Global IP routing mode window, click OK.

How do I find the IP address of my D-Link router?

Press the Windows key and R together. Type cmd in the box and click OK. At the prompt, type ipconfig and press Enter. This will display the IP address, subnet mask, and default gateway of your adapter.

How do D links work?

D-Link routers come with an Ethernet cable using which it can be connected to a modem. A modem enables the devices connected to the router to access the Internet. Some D-Link routers have a built-in DSL modem. Your computer can either make a wired connection or a wireless connection with the router.

How do I check my D-Link warranty?

WAYS TO CONNECT

1. Call D-Link Agent. Dial - 18 and speak to our engineer for instant support.
2. Write to us & Send Email. Share your feedback/ ...
3. Find Service Center. Visit your nearest D-Link service center for swift support.
4. Check Warranty Status. Learn about D-Link warranty policy & saftey information.

How do I configure a manageable switch?

Create the VLANs.

1. Log in to the management page of the switch.
2. Go to Routing - VLAN - VLAN Static Routing Wizard.
3. Enter the VLAN ID, the IP Address and the Network Mask for the VLAN. ...
4. Select the ports to add to the VLAN. ...
5. Click Apply. ...
6. When prompted with the Global IP routing mode window, click OK.

How to log in to a D-Link router?

• Step 1: Open your web browser and enter the IP address of the router into the address bar- (not in google). The default IP is 192.168.0.1 or click here http://192.168.0.1. You can also log into your router using the following link- http://dlinkrouter.local Step 2: You should be taken to a D-Link login page.

Where do I enter my IP address for D-Link smart switch?

• Open your web browser and enter http://10.90.90.90 (the factory-default IP address) in the address box. Then press . Figure 6. Enter the IP address 10.90.90.90 in the web browser The web configuration can also be accessed through the SmartConsole Utility.

Where do I enter dlinkrouter.local IP address?

• Step 1: Open a web browser (such as Internet Explorer) and enter http://dlinkrouter.local. or the IP address of the router (http://192.168.0.1). Enter your router password and click Log In. Step 2: From the Home page, click Management and then click System Admin. Click Admin. Step 3: Click Advanced Settings to open the Administration section.

How do I Reset my D-Link switch's IP address?

• In the manual (do you have one?) it states you can press the Reset button (on the front) for 5 seconds to go to the defaults. Support site for these are here. There is also the option to download the manual. After resetting the device it will be on 10.90.90.90. Thanks.